If you have any technical items that could be featured on this page, then please send them in.
Hints, tips, tricks or basically any useful information regarding the Fiat or Lancia marque would be welcomed.
-
Building a track Fiat X1/9 - Greg Schultz
All the secrets revealed about how Greg Schultz built one of the quickest single cam X1/9s about, not to mention one of
the best built.
-
Lancia Beta Engine number and Model correlation
All you could possibly want to know about engine and model numbers for the entire range of Lancia Beta.
Thanks to Rob Wiltshire for sharing this information with us.
-
Fiat 128 and X1/9 Ignition Helper
This was written for US models, but you should be able to find some useful information about
timing your 128 or X1/9 here.
-
Headlight brightening tip by Mike Coles
Headlights getting a bit dull? You could be suffering from the dreaded voltage drop syndrome.
There have been many attempts at curing dull headlights - some effective, but most of them
unnecessarily complicated. Mike has come up with a simple, inexpensive and elegant fix for a
common but sometimes perplexing problem.
-
X1/9 rear ball joint repair by Greg Schultz
Have a problem with your X1/9 wandering in the rear? Perhaps your ball joints are knackered!
If so then this article is for you!
INJECT-A-JOINT in Brisbane can inject a polymer compound into Fiat X1/9 and other ball
joints as a repair for worn ball joints. Cost is reasonable, and carries a 2 year warranty.
Contact Alex on 0408 752 070.
-
Modifying Fiat X1/9 rear struts for inserts by Greg Schultz
Thinking of replacing your standard struts? Be sure to have a look at this article by
Greg Schultz before you start.
|
|
|
|
|